641-792-8285 Contact Us
Print

PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

Share this Product

Details

Weight
7.75 lbs
Our price
US$526.35

Options

26 inch Rod Extensions
Sampling Tube(s)
Quantity

Product Description

JMC Backsaver Handle with Special Cleaner

Don't risk serious injury to your back, hands, or wrists. Pull samples easily with our JMC Backsaver Handle. Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches. No bending over - handgrip stays at waist level throughout the sampling procedure.

Picture above shows the JMC Backsaver Handle with an 18 inch Dry Sampling Tube. The included JMC Special Cleaner rests inside the leather pouch (also included) hanging from the technician’s belt.

How the JMC Backsaver Handle Works

Simply step down on the footpedal to plant your sampling tube. Then, bend your knees, grab the handgrip (now near waist level), and straighten your legs to lift the sampler out of the ground. Remove your sample with the JMC Special Cleaner and you are ready to sample again.

Insert the tube into the same hole in the ground. Step lightly on the footpedal to release the sliding rod inside the handle. Let 8 to 12 inches of the rod slide out of the handle. Then step down hard on the footpedal to lock the rod and drive the sampling tube further into the ground. When the tube is full (You can track depth by looking at the holes in the side of the Backsaver Handle), grab the handgrips and straighten your legs to lift the tube from the ground as you did before. When the handgrip gets too high, step lightly on the foot pedal and slide some of the rod back into the handle. Continue lifting the handgrips and adjusting the handle’s height as needed until the tube comes out of the ground. After cleaning the tube, either reenter the same hole for a deeper sample or move to a new site.

Our JMC Backsaver Handle fits a variety of soil sampling tubes. Each tube features a self-sharpening tip that pulls consistently good cores and outlasts common replaceable tips eight to one.



We have 4 kinds of tubes for this option.

  Wet Sampling Tubes.
Work best in soft, moist soils.
Core diameter is 0.688 inches.
  Dry Sampling Tubes.
Work best in hard, dry soils.
Core diameter is 0.75 inches.
(If you just want one tube, get one of these,)
  Ag Consultant's Sampling Tube
Same tip design as the Dry Tubes.
Core diameter is 0.56 inches.
  Large Diameter Sampling Tube
Same tip design as the Dry Tubes.
Core diameter is 1.2 inches.
Photo: JMC Wet and Dry Sampling Tubes
Pictured Above: Wet and Dry JMC Sampling Tubes.

 

  • All tubes feature hardened cutting tips, DOM high strength steel, and a protective electroless nickel-plated finish.
  • Handle also compatible with the JMC Zero Contamination Sampling Tubes.
  • JMC Special Cleaner rapidly removes soil core and prepares tube for next sample.
  • Footpedal offers extra leverage for penetrating hard ground.
  • Strong, lightweight, nickel-plated, steel tubing protects against rust and wear.
  • Optional Rod Extensions may be added for more depth capability.
    This option includes the following:
  • 1 – JMC Backsaver Handle
  • 1 – JMC Special Cleaner.
  • 1 – Leather belt pouch for Special Cleaner
  • 1 – Your choice of Wet, Dry, Ag Consultant's or Large Diameter Sampling Tube

  • Related

  • Recommended

  • Reviews

  • Send
  • PN014 JMC 12 inch Zero Contamination Sampling Tube

    PN014 JMC 12 inch Zero Contamination Sampling Tube
    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.
    US$317.36
  • PN047 Set of 15, PETG 12 inch Liners w/ Caps

    PN047 Set of 15, PETG 12 inch Liners w/ Caps
    Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$29.65
  • PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 12" long. Although made for the JMC 12" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe and the JMC 18 inch Zero Contamination Tube when used with Spacers.

    US$26.76
  • PN057 JMC 18 inch Zero Contamination Sampling Tube

    PN057 JMC 18 inch Zero Contamination Sampling Tube
    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.
    US$387.07
  • PN058 Set of 15, PETG 18 inch Liners w/ Caps

    PN058 Set of 15, PETG 18 inch Liners w/ Caps
    Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$42.55
  • PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

    US$36.19
  • PN004 JMC 26 inch Rod Extension

    PN004 JMC 26 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.

    Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

    US$70.97
  • PN005 JMC 13 inch Rod Extension

    PN005 JMC 13 inch Rod Extension
    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.
    US$62.67
  • PN006 JMC 12 inch Wet Sampling Tube

    PN006 JMC 12 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$101.71
  • PN010 JMC 18 inch Wet Sampling Tube

    PN010 JMC 18 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 15 inches long by 0.688 inches diameter.
    US$108.63
  • PN007 JMC 12 inch Dry Sampling Tube

    PN007 JMC 12 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.
    US$101.71
  • PN011 JMC 18 inch Dry Sampling Tube

    PN011 JMC 18 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 15 inches long by 0.75 inches diameter.
    US$108.63
  • PN013 JMC 18 inch Large Diameter Sampling Tube

    PN013 JMC 18 inch Large Diameter Sampling Tube
    Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!
    US$215.65
  • PN018 JMC Special Cleaner

    PN018 JMC Special Cleaner
    • Cleans JMC standard sampling tubes quickly and thoroughly.
    • Minimizes effort needed to extract samples.
    • Lubricates tube for easier sampling and corrosion resistance.
    • Keeps hands clean and uninjured.
    US$89.80
  • PN031 JMC 36 inch Low Cost Sampler with Step

    PN031 JMC 36 inch Low Cost Sampler with Step
    • Samples down to 12 inches.
    • Footpedal offers extra leverage for penetrating hard ground.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$102.61
    OUT OF STOCK
  • PN131 JMC Cleaning Brush

    PN131 JMC Cleaning Brush

    This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

    US$23.83
  • PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment

    PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment
    Fits the Backsaver and Backsaver N-2 handles as well as rod extensions and sampling tubes. Also holds augers with 34 inch extensions.
    US$207.63

Product Rating

Sign in to rate

Customer Reviews

I have been using a backsaver soil probe for 15 years and still have my original one. It is the best there is, from the handy ratcheting design, to the great cutting tip. There are a lot of other soil probes out there, but this one works the best.

Danyal Kasapligil

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2024 JMC Soil Samplers