641-792-8285 Contact Us
Print

PN001(SBD) JMC Backsaver Handle with Special Cleaner and Zero Contamination Tube

PN001(SBD) JMC Backsaver Handle with Special Cleaner and Zero Contamination Tube

Share this Product

Details

Weight
9.75 lbs
Our price
US$526.35

Options

Zero Contamination Tube Desired:
Quantity

Product Description

JMC Backsaver Handle with Special Cleaner and JMC Zero Contamination Tube

Don't risk serious injury to your back, hands, or wrists. Pull samples easily with our JMC Backsaver Handle. Fitted with an 18 inch JMC Zero Contamination Tube, this handle allows you to gather undisturbed soil samples encased in removeable PETG Copyester liners down to 46 inches. No bending over - handgrip stays at waist level throughout the sampling procedure.

Simply step down on the footpedal to plant your sampling tube. Then, grab the hand grip (now near waist level) and use your legs to lift the sampler out of the ground. Clean your tube quickly by first removing the plastic liner containing your sample. Then unplug the end of the tube with the JMC Special Cleaner held in a leather pouch on your belt. Finally, insert a clean liner into the sampling tube and you are ready to go again.

Insert the tube into the same hole in the ground. Step lightly on the footpedal to release the sliding rod inside the handle. Let 8 to 12 inches of the rod slide out of the handle. Then step down hard on the footpedal to lock the rod and drive the sampling tube further into the ground. When the tube is full (You can track depth by looking at the holes in the side of the Backsaver), pull the tube from the ground as you did before. When the hand grip gets too high for comfort, step lightly on the foot pedal and slide some of the rod back into the handle.


  • Tube isolates sample from surrounding soil while being lifted out of the ground.
  • Vinyl caps seal sample inside liner during transit to your lab.
  • Samples measure 0.8 inches in diameter.
  • Tubes available in 12 or 18 inch lengths.
  • Foot pedal offers extra leverage for penetrating hard ground.
  • Strong, lightweight, nickel-plated steel tubing resists rust and wear.
  • Extra liners available. (See related product list below.)
  • Stainless Steel liners also available. (See related product list below.)
  • Handle samples to 8 feet with JMC Rod Extensions.
         (See related product list below.)
    Included in this package are:
  • 1 – JMC Backsaver Handle with Special Cleaner
  • 1 – JMC Zero Contamination Sampling Tube
  • 15 – PETG Copolyester Liners
  • 15 – Black vinyl caps
  • 15 – Red vinyl caps
  • 1 – Pull pin (quickest method for unloading samples)
  • 1 – Straight pin (for sampling deeper than length of tube with extensions)
Photo: JMC Zero Contamination Tube and Liner

Several different sampling tubes will fit this handle. click here for a pop-up summary or click the links in the related products list below.

  • Related

  • Recommended

  • Reviews

  • Send
  • PN047 Set of 15, PETG 12 inch Liners w/ Caps

    PN047 Set of 15, PETG 12 inch Liners w/ Caps
    Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$29.65
  • PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 12" long. Although made for the JMC 12" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe and the JMC 18 inch Zero Contamination Tube when used with Spacers.

    US$26.76
  • PN058 Set of 15, PETG 18 inch Liners w/ Caps

    PN058 Set of 15, PETG 18 inch Liners w/ Caps
    Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$42.55
  • PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

    US$36.19
  • PN006 JMC 12 inch Wet Sampling Tube

    PN006 JMC 12 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$101.71
  • PN007 JMC 12 inch Dry Sampling Tube

    PN007 JMC 12 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.
    US$101.71
  • PN008 JMC 15 inch Wet Sampling Tube

    PN008 JMC 15 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 12 inches long by 0.688 inches diameter.
    US$105.04
  • PN009 JMC 15 inch Dry Sampling Tube

    PN009 JMC 15 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 12 inches long by 0.75 inches diameter.
    US$105.04
  • PN010 JMC 18 inch Wet Sampling Tube

    PN010 JMC 18 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 15 inches long by 0.688 inches diameter.
    US$108.63
  • PN011 JMC 18 inch Dry Sampling Tube

    PN011 JMC 18 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 15 inches long by 0.75 inches diameter.
    US$108.63
  • PN029 JMC 12 inch Ag Consultant's Sampling Tube

    PN029 JMC 12 inch Ag Consultant's Sampling Tube
    A smaller diameter version of our regular sampling tube. Sample core measures 9 inches long by 0.56 inches diameter.
    US$112.01
  • PN030 JMC 18 inch Ag Consultant's Sampling Tube

    PN030 JMC 18 inch Ag Consultant's Sampling Tube
    A smaller diameter version of our regular sampling tube. Sample core measures 15 inches long by 0.56 inches diameter.
    US$128.60
  • PN012 JMC 12 inch Large Diameter Sampling Tube

    PN012 JMC 12 inch Large Diameter Sampling Tube
    Sample core measures 9 inches long by 1.25 inches diameter - almost 3 times the volume of our 12 inch Dry Sampling Tube!
    US$204.52
  • PN013 JMC 18 inch Large Diameter Sampling Tube

    PN013 JMC 18 inch Large Diameter Sampling Tube
    Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!
    US$215.65
  • PN400 JMC 2 by 6 inch Concentric Sampling Tube

    PN400 JMC 2 by 6 inch Concentric Sampling Tube

    Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.

    US$905.95
  • PN005 JMC 13 inch Rod Extension

    PN005 JMC 13 inch Rod Extension
    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.
    US$62.67
  • PN004 JMC 26 inch Rod Extension

    PN004 JMC 26 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.

    Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

    US$70.97
  • PN050 JMC Low Cost 18 inch Sampler

    PN050 JMC Low Cost 18 inch Sampler
    • Samples down to 15 inches.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$59.67
  • PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

    US$36.19
  • Auger System(Clay)

    Auger System(Clay)

    Let us help build your sampling kit. We'll make sure you have everything you need to get started sampling the moment you receive your kit.

    US$0.00
    OUT OF STOCK
  • PN131 JMC Cleaning Brush

    PN131 JMC Cleaning Brush

    This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

    US$23.83
  • PN473 JMC Environmental Fate Deluxe Sampling System

    PN473 JMC Environmental Fate Deluxe Sampling System
    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.
    US$4293.56
  • PN164 Impact Cushioning Washer for JMC ESP

    PN164 Impact Cushioning Washer for JMC ESP
    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN445 Footpedal for JMC ESP PLUS

    PN445 Footpedal for JMC ESP PLUS
    Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe PLUS. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.
    US$200.64
  • PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment

    PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment
    Fits the Backsaver and Backsaver N-2 handles as well as rod extensions and sampling tubes. Also holds augers with 34 inch extensions.
    US$207.63
  • PN247 Fulcrum ESP and ESP Plus

    PN247 Fulcrum ESP and ESP Plus
    Fulcrum for foot pedal.
    US$91.72

Product Rating

Sign in to rate

Customer Reviews

I have been using a backsaver soil probe for 15 years and still have my original one. It is the best there is, from the handy ratcheting design, to the great cutting tip. There are a lot of other soil probes out there, but this one works the best.

Danyal Kasapligil

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2024 JMC Soil Samplers