641-792-8285 Contact Us

PN043 Footpedal for JMC Backsaver Handles

PN043 Footpedal for JMC Backsaver Handles

Share this Product

Details

Weight
0.70 lbs
Our price
US$84.96

Options

Quantity

Product Description

Replacement footpedal for JMC Backsaver and Backsaver N-3 Handles.

Usually the first thing that wears out on the JMC Backsaver and JMC Backsaver N-3 Handles is the springloaded footpedal. The footpedal has a hole through which the sliding rod passes. As the hole gets worn away, the pedal has less ability to grip the sliding rod. If you notice your handle slipping when you step down hard on the footpedal, it is time to replace the footpedal.

Replacement is easy. You'll need a round hole punch 3/16 inch in diameter, a small hammer, needle-nosed pliers, and a screwdriver.

  1. Poke out the roll pin found at the top of the sliding rod.
  2. Pull the rod out of the handle.
  3. Compress the spring with your thumb so you can pull the footpedal out of the handle.
  4. While keeping the spring compressed, insert the new footpedal.
  5. Insert a screwdriver nto the hole in the footpedal. Wiggle it around to line up the spring with the hole.
  6. Insert the pushrod and replace the pin.

For your convenience, we include an extra roll pin with your replacement footpedal.

(Please Note: This footpedal will NOT fit the JMC Backsaver N-2 Handle.)



  • Related

  • Recommended

  • Reviews

  • Send

  • PN044 Replacement Spring for JMC Backsaver Handle

    Replacement spring for PN001 JMC Backsaver or PN002 JMC Backsaver N-3 Handle

    This spring does not fit the PN003 JMC Backsaver N-2 Handles.

    US$15.73
  • PN045 Pushrod for JMC Backsaver Handle

    Replacement pushrod for PN001 JMC Backsaver Handle.

    Does NOT fit the PN002 JMC Backsaver N-3 or PN003 JMC Backsaver N-2 Handles.

    US$87.06
  • PN046 Pushrod for JMC Backsaver N-3 Handle

    Replacement pushrod for PN002 JMC Backsaver N-3 Handle.

    Does NOT fit the PN001 JMC Backsaver or PN003 JMC Backsaver N-2 Handles.

    US$102.94
  • PN006 JMC 12 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$101.71
  • PN007 JMC 12 inch Dry Sampling Tube

    Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.
    US$101.71
  • PN009 JMC 15 inch Dry Sampling Tube

    Works well in hard, dry soils. Sample core measures 12 inches long by 0.75 inches diameter.
    US$105.04
  • PN012 JMC 12 inch Large Diameter Sampling Tube

    Sample core measures 9 inches long by 1.25 inches diameter - almost 3 times the volume of our 12 inch Dry Sampling Tube!
    US$204.52
  • PN018 JMC Special Cleaner

    • Cleans JMC standard sampling tubes quickly and thoroughly.
    • Minimizes effort needed to extract samples.
    • Lubricates tube for easier sampling and corrosion resistance.
    • Keeps hands clean and uninjured.
    US$89.80
  • PN031 JMC 36 inch Low Cost Sampler with Step

    • Samples down to 12 inches.
    • Footpedal offers extra leverage for penetrating hard ground.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$102.61
  • PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

    Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

    US$628.06
  • PN045 Pushrod for JMC Backsaver Handle

    Replacement pushrod for PN001 JMC Backsaver Handle.

    Does NOT fit the PN002 JMC Backsaver N-3 or PN003 JMC Backsaver N-2 Handles.

    US$87.06
  • PN044 Replacement Spring for JMC Backsaver Handle

    Replacement spring for PN001 JMC Backsaver or PN002 JMC Backsaver N-3 Handle

    This spring does not fit the PN003 JMC Backsaver N-2 Handles.

    US$15.73

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *