PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

• 

  PN238 - 6 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit a 12 inch liner into an 18 inch Zero Contamination Tube. It would also fill the empty space in a 36 inch ESP Sampling containing one 12 inch and one 18 inch liner. Remember the spacer sits on TOP of the PETG Copolyester or Stainless Steel liners inside your sampling tube.

  US$27.95
• 

  PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

  US$29.93
• 

  PN232 - 18 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$34.44
• 

  PN233 - 24 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$38.82
• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07

• 

  PN004 JMC 26 inch Rod Extension

  Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes. Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

  US$70.97
• 

  PN448 Bosch 11316 Percussion Hammer & Case w/Adapter for ESP PLUS

  Reduces operator fatigue. Punches through frozen and compacted soils. Slips easily onto ESP PLUS sampling tubes or extensions with proprietary adapter. Runs on standard AC current or 1600 watt electric generator.

  US$1647.12
• 

  PN431 Set of 15, PETG 48 inch Liners w/ Caps

  Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$77.65
• 

  PN069 JMC 3 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.

  US$348.87
• 

  PN064 JMC 3 inch Quick Connect Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all JMC Quick Connect Professional Auger components.

  US$369.11
• 

  PN460 - 12 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$25.27
• 

  PN039 JMC Collapsible Soil Sampler with Screw Auger & 12 inch Wet Sampling Tube

  Very compact! Disassembled measures 13 x 3 x 2 inches. Self-sharpening, hardened cutting tip lasts 8x longer than most replaceable tips. JMC Screw Auger penetrates more difficult soils. Sampling tube works best in soft moist soils. Sample Diameter: 0.688 inches. Handle fits other JMC sampling tubes.

  US$402.93
• 

  PN044 Replacement Spring for JMC Backsaver Handle

  Replacement spring for PN001 JMC Backsaver or PN002 JMC Backsaver N-3 Handle This spring does not fit the PN003 JMC Backsaver N-2 Handles.

  US$15.73
• 

  PN452 Impact Cushioning Washer for JMC ESP PLUS

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN453). This is the part that rests on the top of the sampling tube.

  US$15.16

Login to post a review