641-792-8285 Contact Us

PN073(BB1) JMC 2" Clay Auger with Standard Handgrip

PN073(BB1) JMC 2" Clay Auger with Standard Handgrip

Share this Product

Details

Weight
3.37 lbs
Our price
US$478.36

Options

Quantity

Product Description


Pictured Above: Our JMC Standard Auger Handgrip

Pictured Above: Our JMC 2 inch Professional Clay Auger

JMC Standard Auger Handgrip

  • Compatible with all threaded connection JMC Professional Augers and Extensions.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.
  • Not designed to be used with a mallet.

JMC 2 inch Professional Clay Auger

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Remove the sample easily - just invert auger and thump handgrip on the ground.

  • 2 inch Augers cut 2.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions
Note: Contrary to its name, the clay auger, and not our General Purpose Auger, is the most adaptable to the widest range of soil conditions.
  • Recommended

  • Reviews

  • Send

  • PN114 Deluxe Case for Backsavers or 45" Extensions

    Fits all augers, extensions, sampling tubes, and handles except JMC Backsaver N-3 Handle and JMC Environmentalist's Sub-Soil Probe.
    US$740.14
  • PN175 Solid Point for JMC ESP Sampling Tubes

    Use our solid tip instead of a cutting tip to plunge to desired depth without filling the sampling tube. Useful for creating small diameter monitoring wells or limiting sample debris.
    US$168.96
  • PN069 JMC 3 inch Professional General Purpose Auger

    Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.
    US$348.87
  • PN031 JMC 36 inch Low Cost Sampler with Step

    • Samples down to 12 inches.
    • Footpedal offers extra leverage for penetrating hard ground.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$102.61
  • The JMC Environmentalist's Sub-Soil Probe Soil Dissipation Study Sampling System

    • Pulls sample 3 (or 4) feet long.
    • Samples to 21 feet with extensions
    • Captures sample in a plastic liner.
    • Drives sampling tube with a 12.5 pound manual(or electric hammer).
    • Retrieves sample with a foot-operated jack.
    • 0.8 or 1.2 inch diameter systems available.
    US$0.00
  • PN139 JMC 42 inch Dakota Probe

    • Pulls a 42 inch sample.
    • Self-sharpening cutting tip
    • Nickel-plated, DOM high strength steel.
    US$272.87
  • PN473 JMC Environmental Fate Deluxe Sampling System

    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.
    US$4293.56
  • PN162 Guide Rod for ESP and ESP Plus

    Threaded Guide Rod fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

    US$97.71
  • PN433 Guide Rod Assembly for JMC ESP PLUS

    Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS (1.2 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.
    US$300.41

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *