641-792-8285 Contact Us

PN074 JMC 2 inch Professional Sand Auger

PN074 JMC 2 inch Professional Sand Auger

Share this Product

Details

Weight
2.60 lbs
Our price
US$337.89

Options

Quantity

Product Description

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Sample removes easily from auger - just invert auger and thump handgrip on the ground.

  • 2 inch Augers cut 2.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions.
    Special Note: If you want only one auger for a variety of sampling conditions, we recommend the JMC Clay Auger rather than the JMC General Purpose Auger. Contrary to its name, the clay auger is the most adaptable to the widest range of soil. conditions.
  • Related

  • Recommended

  • Reviews

  • Send

  • PN153 Set of 15, PETG 36 inch Liners w/ Caps

    Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$65.45
  • The JMC Environmentalist's Sub-Soil Probe Sampling System

    • Pulls sample 3 (or 4) feet long.
    • Samples to 21 feet with extensions
    • Captures sample in a plastic liner.
    • Drives sampling tube with a 12.5 pound manual(or electric hammer).
    • Retrieves sample with a foot-operated jack.
    • 0.8 or 1.2 inch diameter systems available.
    US$0.00
  • PN014 JMC 12 inch Zero Contamination Sampling Tube

    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.
    US$317.36
  • PN073 JMC 2 inch Professional Clay Auger

    In spite of its name, the Clay Auger will sample the widest variety of soils. Good for most soils between dry sand and wet mud. Fits all threaded connection JMC Professional Auger components.
    US$390.94
  • PN101 JMC Quick Connect 2 inch Professional Sand Auger

    Good for dry and wet sands. Fits all JMC Quick Connect Professional Auger components.
    US$428.18
  • PN472 JMC Environmental Fate Sampling System

    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. Compatible with the JMC Environmentalist Sub-Soil Probe or any hydraulic soil probe, it maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples.
    US$3103.25
  • PN045 Pushrod for JMC Backsaver Handle

    Replacement pushrod for PN001 JMC Backsaver Handle.

    Does NOT fit the PN002 JMC Backsaver N-3 or PN003 JMC Backsaver N-2 Handles.

    US$87.06
  • PN163 Threaded Collar for ESP and ESP PLUS Guide Rod

    Threaded Collar fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

    US$50.78
  • PN453 Aluminum Cylinder for ESP PLUS

    Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler).

    • Precision machined aluminum
    • Milled flats for tightening with a wrench
    US$93.36

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *