641-792-8285 Contact Us
Print

PN074(BB1) JMC 2" Sand Auger with Standard Handgrip

PN074(BB1) JMC 2" Sand Auger with Standard Handgrip

Share this Product

Details

Weight
4.00 lbs
Our price
US$425.31

Options

Quantity


Product Description

Photo: JMC Standard Auger Handgrip
Pictured Above: Our JMC Standard Auger Handgrip		JMC 2 inch Professional Sand Auger
Pictured Above: Our JMC 2 inch Professional Sand Auger

JMC Standard Auger Handgrip

  • Compatible with all threaded connection JMC Professional Augers and Extensions.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.
  • Not designed to be used with a mallet.

JMC 2 inch Professional Sand Auger

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Remove the sample easily - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 2.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions
Note: Similar in design to the JMC Professional General Purpose Auger, the JMC Professional Sand Auger works best in slightly moist to wet sands and similar materials.

  • Recommended

  • Reviews

  • Send
  • PN176 Standard Cutting Tip for JMC ESP Sampling Tubes

    PN176 Standard Cutting Tip for JMC ESP Sampling Tubes
    Replacement cutting tip for most soil types.
    US$127.99
  • The JMC Backsaver Handle Soil Sampling Kit

    The JMC Backsaver Handle Soil Sampling Kit
    • Pulls samples 9 to 15 inches long.
    • Samples to 8 feet with extensions.
    • Handle stays near waist level at all times - no bending over!
    • Carry it anywhere you can walk.
    • Includes cleaning tool for sampling tubes.
    • 0.6 to 1.2 inch diameter sampling tubes available.
    US$0.00
    OUT OF STOCK
  • PN118 Standard Case for Backsavers or 45 inch Extensions

    PN118 Standard Case for Backsavers or 45 inch Extensions
    Fits all augers, extensions, sampling tubes, and handles except the JMC Backsaver N-3 Handle and the JMC Environmentalist's Sub-Soil Probe.
    US$269.92
  • PN156 48 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN156 48 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 48" long. Will fit the JMC Environmentalist's Sub-Soil Probe equipped with a 4 foot sampling tube.

    US$89.87
  • PN039 JMC Collapsible Soil Sampler with Screw Auger & 12 inch Wet Sampling Tube

    PN039 JMC Collapsible Soil Sampler with Screw Auger & 12 inch Wet Sampling Tube
    • Very compact! Disassembled measures 13 x 3 x 2 inches.
    • Self-sharpening, hardened cutting tip lasts 8x longer than most replaceable tips.
    • JMC Screw Auger penetrates more difficult soils.
    • Sampling tube works best in soft moist soils.
    • Sample Diameter: 0.688 inches.
    • Handle fits other JMC sampling tubes.
    US$402.93
  • PN161 Aluminum Cylinder for ESP

    PN161 Aluminum Cylinder for ESP

    Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler).

    • Precision machined aluminum
    • Milled flats for tightening with a wrench
    US$79.28
  • PN164 Impact Cushioning Washer for JMC ESP

    PN164 Impact Cushioning Washer for JMC ESP
    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN201 Hammer for ESP or ESP PLUS

    PN201 Hammer for ESP or ESP PLUS
    The heavy (12 pounds) metal sleeve that moves up and down while pounding the sampling tube into the ground. Fits both the JMC Environmentalist's Sub-Soil Probe and the JMC Environmentalist's Sub-Soil Probe PLUS.
    US$556.34
  • PN434 Core Retainer Tool

    PN434 Core Retainer Tool
    Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.
    US$286.45

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2025 JMC Soil Samplers