641-792-8285 Contact Us

PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

Share this Product

Details

Weight
0.75 lbs
Our price
US$89.40

Options

Quantity

Product Description

If you already own a JMC Professional Auger with threaded connections, you don't need to invest in a new handle and extensions just to pull a soil core. All you need is this Adapter and your choice of a JMC Soil Sampling Tube.

In fact, if you want to obtain an extremely accurate sample from a particular strata, you will have the best results with this procedure:

  1. Carve a hole with your auger down to the top of the desired strata.
     
  2. Replace the auger head with this adapter and a JMC Sampling Tube.
          (We recommend the JMC Zero Contamination Tube for this application.)
     
  3. Remove any loose debris inside the hole with a vacuum cleaner.
     
  4. Lower the sampling tube into the hole and take your sample.
     

Tip: A JMC Driveable Auger Handgrip and a PN017 Dead-Blow Mallet (See Related Products List below) will make tube sampling easier. If desired, the hole may be deepened by reinstalling the auger and reentering the same hole.

  • Related

  • Recommended

  • Reviews

  • Send

  • PN176 Standard Cutting Tip for JMC ESP Sampling Tubes

    Replacement cutting tip for most soil types.
    US$127.99
  • The JMC Backsaver Handle Soil Sampling Kit

    • Pulls samples 9 to 15 inches long.
    • Samples to 8 feet with extensions.
    • Handle stays near waist level at all times - no bending over!
    • Carry it anywhere you can walk.
    • Includes cleaning tool for sampling tubes.
    • 0.6 to 1.2 inch diameter sampling tubes available.
    US$0.00
  • PN030 JMC 18 inch Ag Consultant's Sampling Tube

    A smaller diameter version of our regular sampling tube. Sample core measures 15 inches long by 0.56 inches diameter.
    US$128.60
  • PN058 Set of 15, PETG 18 inch Liners w/ Caps

    Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$42.55
  • PN071 JMC 3 inch Professional Sand Auger

    Good for dry and wet sands. Fits all threaded connection JMC Professional Auger components.
    US$348.87
  • PN055 JMC Conventional Handle

    • Lightweight handle will fit most JMC sampling tubes.
    • Designed for soft soils.
    • Do NOT use with a mallet.
    • Sampling Tubes sold separately.
    US$97.09
  • PN150 JMC Environmentalist's Sub-Soil Probe

    The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.
    US$3296.78
  • PN184 Core Guide for ESP Sampling Tube

    Replacement part. Sandwiched between lower end of sampling tube and cutting tip. Directs flow of soil into the liner. Without it, clay samples have a tendency to crumple the plastic liners.
    US$33.49
  • PN246 Pedal Depressor Block

    Pedal Depressor block.
    US$28.65

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *