- Fits all threaded connection JMC Professional Augers and Extensions.
- May be struck with a soft-faced mallet.
- Heavy-Duty construction to withstand field abuse.
- Nickel-Plated to protect against rust and wear.
This handgrip withstands pounding from a soft-faced mallet like our PN017 Dead-Blow Mallet. You may find this helpful when trying to get a hole started in difficult ground conditions.
Another Advantage to Consider:
|
A Driveable Handgrip gives you the option of retrieving core samples with a sampling tube. Simply replace the auger at the end of your extensions with a JMC Sampling Tube and a PN110 JMC Auger to Sampling Tube Adapter and you are ready to go. (see picture at right)
In fact, if you want to obtain an extremely accurate sample from a particular strata, you will have the best results with this procedure:
- Carve a hole with your auger down to the top of the desired strata.
- Replace the auger head with any
JMC Sampling Tube and a
PN110 JMC Sampling Tube Adapter.
- Remove any loose debris inside the hole with a vacuum cleaner.
- Lower the sampling tube into the hole and take your sample.
|
 |
Please Note: Sampling Tube Adapter and Sampling Tubes can be ordered with the links found in the Recommended Products List below. Clicking on the links will open a new window. You will not lose this page. After selecting your sampling tube(s) and adapter, just close the window and continue building your auger kit. When you finish building your kit, the tube(s) and adapter you selected will appear in your shopping cart along with the auger kit. |
|
RelatedRecommendedReviewsSend
-
-
-
-
-
-
-
-
-
-
-
-
-
-
PN400 JMC 2 by 6 inch Concentric Sampling Tube
Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.
|
US$905.95
-
-
The JMC Backsaver Handle Soil Sampling Kit
- Pulls samples 9 to 15 inches long.
- Samples to 8 feet with extensions.
- Handle stays near waist level at all times - no bending over!
- Carry it anywhere you can walk.
- Includes cleaning tool for sampling tubes.
- 0.6 to 1.2 inch diameter sampling tubes available.
|
US$0.00
-
-
-
-
PN161 Aluminum Cylinder for ESP
Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler).
- Precision machined aluminum
- Milled flats for tightening with a wrench
|
US$79.28
-
PN164 Impact Cushioning Washer for JMC ESP
|
Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
|
US$13.43
-
PN201 Hammer for ESP or ESP PLUS
|
The heavy (12 pounds) metal sleeve that moves up and down while pounding the sampling tube into the ground. Fits both the JMC Environmentalist's Sub-Soil Probe and the JMC Environmentalist's Sub-Soil Probe PLUS.
|
US$556.34
-
PN434 Core Retainer Tool
|
Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.
|
US$286.45
Product Rating
Customer Reviews
There have been no reviews for this product.
Login
to post a review
Copyright © 2007-2025 JMC Soil Samplers
|
