PN155 36 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

• 

  PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

  US$29.93

• 

  PN230 JMC Pin Ejection Tool

  Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.

  US$136.19
• 

  The JMC Environmentalist's Sub-Soil Probe Sampling System

  Pulls sample 3 (or 4) feet long. Samples to 21 feet with extensions Captures sample in a plastic liner. Drives sampling tube with a 12.5 pound manual(or electric hammer). Retrieves sample with a foot-operated jack. 0.8 or 1.2 inch diameter systems available.

  US$0.00

  OUT OF STOCK
• 

  PN010 JMC 18 inch Wet Sampling Tube

  Work best in soft, moist soils. Sample core measures 15 inches long by 0.688 inches diameter.

  US$108.63
• 

  PN007 JMC 12 inch Dry Sampling Tube

  Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.

  US$101.71
• 

  PN060 JMC Quick-Connect Auger Handgrip

  Compatible with all JMC Quick Connect Augers and Extensions. Should NOT be struck with a mallet.

  US$135.22
• 

  PN070 JMC 3 inch Professional Clay Auger

  In spite of its name, the Clay Auger will sample the widest variety of soils. Good for most soils between dry sand and wet mud. Fits all threaded connection JMC Professional Auger components.

  US$396.20
• 

  PN034 JMC Screw Auger

  For penetrating difficult ground conditions where a standard sampling tube fails to penetrate.

  US$239.58
• 

  PN277 JMC Collapsible Soil Sampler with 12 inch Ag Consultant's Sampling Tube

  Very compact! Disassembled system measures 13 x 3 x 2 inches. Self-sharpening, hardened cutting tip lasts 8 times longer than common replaceable tips. Sampling tube works best in dry soils. Sample Diameter is 0.56 inches. Handle fits other JMC sampling tubes.

  US$196.75
• 

  PN046 Pushrod for JMC Backsaver N-3 Handle

  Replacement pushrod for PN002 JMC Backsaver N-3 Handle. Does NOT fit the PN001 JMC Backsaver or PN003 JMC Backsaver N-2 Handles.

  US$102.94

Login to post a review