PN163 Threaded Collar for ESP and ESP PLUS Guide Rod

• 

  PN428 JMC ESP Plus Master Extension

  This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Plus Regular Extensions in addition to this extension.

  US$382.88
• 

  PN112 Deluxe Case for 34 inch Auger Extensions & Backsaver Handles

  Fits all augers, 34 inch extensions, sampling tubes, and handles except JMC Backsaver N-3 Handle and JMC Environmentalist's Sub-Soil Probe.

  US$705.98
• 

  PN067 JMC 3 inch Quick Connect Professional Mud Auger

  Good for mud and heavily saturated clay soils. Fits all JMC Quick Connect Professional Auger components.

  US$254.08
• 

  PN016(SoilFert) JMC T-Handle, Mallet, Extensions & Sampling Tube

  Penetrates hard ground with aid of soft-faced mallet. Depths to several feet obtainable with extra JMC Rod Extensions

  US$349.81
• 

  The JMC Environmentalist's Sub-Soil Probe Soil Dissipation Study Sampling System

  Pulls sample 3 (or 4) feet long. Samples to 21 feet with extensions Captures sample in a plastic liner. Drives sampling tube with a 12.5 pound manual(or electric hammer). Retrieves sample with a foot-operated jack. 0.8 or 1.2 inch diameter systems available.

  US$0.00

  OUT OF STOCK
• 

  PN473 JMC Environmental Fate Deluxe Sampling System

  The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.

  US$4293.56
• 

  PN152 JMC 48 inch Sampling Tube for JMC Environmentalist's Sub-Soil Probe

  Accepts liners up to 48 inches long. Includes Standard Cutting Tip and a Core Guide.

  US$559.20
• 

  PN164 Impact Cushioning Washer for JMC ESP

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.

  US$13.43
• 

  PN246 Pedal Depressor Block

  Pedal Depressor block.

  US$28.65

Login to post a review