PN175 Solid Point for JMC ESP Sampling Tubes

• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3296.78

• 

  PN006 JMC 12 inch Wet Sampling Tube

  Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.

  US$101.71
• 

  PN011 JMC 18 inch Dry Sampling Tube

  Works well in hard, dry soils. Sample core measures 15 inches long by 0.75 inches diameter.

  US$108.63
• 

  PN118 Standard Case for Backsavers or 45 inch Extensions

  Fits all augers, extensions, sampling tubes, and handles except the JMC Backsaver N-3 Handle and the JMC Environmentalist's Sub-Soil Probe.

  US$269.92
• 

  PN100 JMC Quick Connect 2 inch Professional Clay Auger

  In spite of its name, the Clay Auger will sample the widest variety of soils. Good for most soils between dry sand and wet mud. Fits all JMC Quick Connect Professional Auger components.

  US$472.15
• 

  PN016 JMC T-Handle

  Handgrip withstands pounding from a soft-faced mallet for penetrating hard ground. Fits all JMC Rod Extensions and Sampling Tubes. (Sampling Tubes sold separately.)

  US$100.03
• 

  PN232 - 18 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$34.44
• 

  PN473 JMC Environmental Fate Deluxe Sampling System

  The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.

  US$4293.56
• 

  PN462 - 24 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit one 12 inch liner into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$37.31
• 

  PN165 Footpedal for JMC ESP

  Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.

  US$169.22

Login to post a review