PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3296.78
• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07
• 

  PN058 Set of 15, PETG 18 inch Liners w/ Caps

  Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.

  US$42.55
• 

  PN153 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$65.45

• 

  PN004 JMC 26 inch Rod Extension

  Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes. Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

  US$70.97
• 

  PN431 Set of 15, PETG 48 inch Liners w/ Caps

  Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$77.65
• 

  PN027 JMC 45 inch Auger Extension (Threaded Connection)

  Fits all threaded connection Auger Extensions as well as all threaded connection JMC Handgrips and Augers.

  US$129.41
• 

  PN071 JMC 3 inch Professional Sand Auger

  Good for dry and wet sands. Fits all threaded connection JMC Professional Auger components.

  US$348.87
• 

  PN432 Pin for ESP PLUS Extensions

  Replacement pin for both Master and Regular ESP Plus Extensions.

  US$10.98
• 

  PN055(CA21) JMC Conventional Handle with Sampling Tube

  The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

  US$198.80
• 

  PN427 JMC 48 inch Sampling Tube for JMC ESP PLUS

  Accepts liners up to 48 inches long. Includes Standard Cutting Tip.

  US$622.75
• 

  Test Kit

  test kit

  US$0.00

  OUT OF STOCK
• 

  PN246 Pedal Depressor Block

  Pedal Depressor block.

  US$28.65

Login to post a review