PN232 - 18 inch spacer for ESP Tubes

• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3296.78
• 

  PN058 Set of 15, PETG 18 inch Liners w/ Caps

  Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.

  US$42.55

• 

  PN114 Deluxe Case for Backsavers or 45" Extensions

  Fits all augers, extensions, sampling tubes, and handles except JMC Backsaver N-3 Handle and JMC Environmentalist's Sub-Soil Probe.

  US$740.14
• 

  PN006 JMC 12 inch Wet Sampling Tube

  Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.

  US$101.71
• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07
• 

  PN099 JMC Quick Connect 2 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all JMC Quick Connect Professional Auger components.

  US$428.18
• 

  PN066 JMC 3 inch Quick Connect, Professional Sand Auger

  Good for dry and wet sands. Fits all JMC Quick Connect Professional Auger components.

  US$369.11
• 

  PN034 JMC Screw Auger

  For penetrating difficult ground conditions where a standard sampling tube fails to penetrate.

  US$239.58
• 

  PN138 JMC 5 Foot Tile Probe

  For determining the location of buried tile drains, pipes, storage drums, rocks and clay barriers Easy ground penetration and retraction Nickle-plated steel construction No moving parts

  US$70.66
• 

  PN452 Impact Cushioning Washer for JMC ESP PLUS

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN453). This is the part that rests on the top of the sampling tube.

  US$15.16
• 

  PN245 Pedal Depressor Pivot Bolt & Locknut

  Pivot bolt and locknut for ESP or ESP+ pedal depressor.

  US$2.94

Login to post a review