PN233 - 24 inch spacer for ESP Tubes

• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3296.78
• 

  PN047 Set of 15, PETG 12 inch Liners w/ Caps

  Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.

  US$29.65

• 

  PN153 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$65.45
• 

  PN443 Solid Point for JMC ESP Plus Sampling Tubes

  Use our solid tip instead of a cutting tip to plunge to desired depth without filling the sampling tube. Useful for creating small diameter monitoring wells or limiting sample debris.

  US$187.14
• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07
• 

  PN017 Dead Blow Mallet

  Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.

  US$77.10
• 

  PN132 24 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

  Stainless steel liner 24" long. Will fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

  US$46.07
• 

  PN235- 36 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$47.71
• 

  PN068 Quick-Connect Auger to Sampling Tube Adapter (QC to 1/2")

  Adapter lets you use JMC Sampling Tubes with JMC Quick-Connect Auger Extensions and Handgrips.

  US$112.27
• 

  PN434 Core Retainer Tool

  Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.

  US$286.45
• 

  Test Kit

  test kit

  US$0.00

  OUT OF STOCK

Login to post a review