641-792-8285 Contact Us

PN235- 36 inch spacer for ESP Tubes

PN235- 36 inch spacer for ESP Tubes

Share this Product

Details

Weight
0.60 lbs
Our price
US$47.71

Options

Quantity

Product Description

This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  • Related

  • Recommended

  • Reviews

  • Send

  • PN150 JMC Environmentalist's Sub-Soil Probe

    The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.
    US$3296.78
  • PN047 Set of 15, PETG 12 inch Liners w/ Caps

    Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$29.65
  • PN004 JMC 26 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.

    Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

    US$70.97
  • PN428 JMC ESP Plus Master Extension

    This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Plus Regular Extensions in addition to this extension.
    US$382.88
  • PN060 JMC Quick-Connect Auger Handgrip

    Compatible with all JMC Quick Connect Augers and Extensions. Should NOT be struck with a mallet.
    US$135.22
  • PN107 JMC 3 inch Professional Mud Auger

    Good for mud and heavily saturated clay soils. Fits all threaded connection JMC Professional Auger components.
    US$243.38
  • PN180 Vise-Grip Chain Wrench

    Remove cutting tips easily from JMC Environmentalist's Sub-Soil Probe (and Sub-Soil Probe Plus) Sampling tubes! Use one wrench to lock tightly around your sampling tube and another to clamp onto your cutting tip. With two comfortable handgrips, you can unscrew even the most stubborn connection.
    US$65.01
  • PN034 JMC Screw Auger

    For penetrating difficult ground conditions where a standard sampling tube fails to penetrate.

    US$239.58
  • PN473 JMC Environmental Fate Deluxe Sampling System

    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.
    US$4293.56
  • PN150 JMC Environmentalist's Sub-Soil Probe

    The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.
    US$3296.78
  • PN162 Guide Rod for ESP and ESP Plus

    Threaded Guide Rod fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

    US$97.71

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *