PN403 Set of 15, PETG 2 inch by 6 inch Liners w/ Caps

• 

  PN157 JMC ESP Master Extension

  This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Regular Extensions in addition to this extension.

  US$366.40
• 

  The JMC Backsaver Handle Soil Sampling Kit

  Pulls samples 9 to 15 inches long. Samples to 8 feet with extensions. Handle stays near waist level at all times - no bending over! Carry it anywhere you can walk. Includes cleaning tool for sampling tubes. 0.6 to 1.2 inch diameter sampling tubes available.

  US$0.00

  OUT OF STOCK
• 

  PN013 JMC 18 inch Large Diameter Sampling Tube

  Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!

  US$215.65
• 

  Auger System(Sand)

  Let us help build your sampling kit. We'll make sure you have everything you need to get started sampling the moment you receive your kit.

  US$0.00

  OUT OF STOCK
• 

  PN016(SoilFert) JMC T-Handle, Mallet, Extensions & Sampling Tube

  Penetrates hard ground with aid of soft-faced mallet. Depths to several feet obtainable with extra JMC Rod Extensions

  US$349.81
• 

  PN415 Metal Casing for JMC 2 by 6 inch Concentric Sampling Tube

  In some situations, it may be expedient to plant several 2 inch diameter casings in the ground before returning to sample through each one. That is why we sell separate casings for the JMC 2 by 6 inch Concentric Sampling Tube. Remember: This is the casing only. You should already have a Concentric Sampling Tube.

  US$344.62
• 

  PN473 JMC Environmental Fate Deluxe Sampling System

  The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.

  US$4293.56
• 

  PN427 JMC 48 inch Sampling Tube for JMC ESP PLUS

  Accepts liners up to 48 inches long. Includes Standard Cutting Tip.

  US$622.75
• 

  PN164 Impact Cushioning Washer for JMC ESP

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.

  US$13.43

Login to post a review