PN440 Standard Cutting Tip for JMC ESP Plus Sampling Tubes

• 

  PN425 JMC Environmentalist's Sub-Soil Probe PLUS

  The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3889.62

• 

  PN441 Wet Soils Cutting Tip for JMC ESP Plus Sampling Tubes

  Replacement cutting tip for saturated soils where compaction of the soil sample is a problem.

  US$172.39
• 

  PN430 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe Plus' 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$73.75
• 

  PN069 JMC 3 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.

  US$348.87
• 

  PN180 Vise-Grip Chain Wrench

  Remove cutting tips easily from JMC Environmentalist's Sub-Soil Probe (and Sub-Soil Probe Plus) Sampling tubes! Use one wrench to lock tightly around your sampling tube and another to clamp onto your cutting tip. With two comfortable handgrips, you can unscrew even the most stubborn connection.

  US$65.01
• 

  PN055(CA21) JMC Conventional Handle with Sampling Tube

  The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

  US$198.80
• 

  PN461 - 18 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit one 18 inch liner into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$31.27
• 

  PN045 Pushrod for JMC Backsaver Handle

  Replacement pushrod for PN001 JMC Backsaver Handle. Does NOT fit the PN002 JMC Backsaver N-3 or PN003 JMC Backsaver N-2 Handles.

  US$87.06
• 

  PN202 Guide Rod Assembly for JMC ESP

  Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

  US$254.64
• 

  PN433 Guide Rod Assembly for JMC ESP PLUS

  Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS (1.2 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

  US$300.41

Login to post a review