PN462 - 24 inch spacer for ESP Plus Tubes

• 

  PN425 JMC Environmentalist's Sub-Soil Probe PLUS

  The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3889.62

• 

  PN004 JMC 26 inch Rod Extension

  Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes. Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

  US$70.97
• 

  PN157 JMC ESP Master Extension

  This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Regular Extensions in addition to this extension.

  US$366.40
• 

  PN002 JMC Backsaver N-3 Handle with Special Cleaner

  Samples to 66 inches with an 18 inch JMC Sampling Tube. No bending over. Sampling tubes sold separately.

  US$616.99
• 

  PN029 JMC 12 inch Ag Consultant's Sampling Tube

  A smaller diameter version of our regular sampling tube. Sample core measures 9 inches long by 0.56 inches diameter.

  US$112.01
• 

  PN072 JMC 2 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.

  US$337.89
• 

  PN233 - 24 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$38.82
• 

  PN155 36 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

  Stainless steel liner 36" long. Will fit the JMC Environmentalist's Sub-Soil Probe.

  US$60.62
• 

  PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

  Adapter lets you use JMC Sampling Tubes with JMC Threaded Auger Extensions and Handgrips.

  US$89.40
• 

  PN245 Pedal Depressor Pivot Bolt & Locknut

  Pivot bolt and locknut for ESP or ESP+ pedal depressor.

  US$2.94

Login to post a review