Replacement cutting tip for saturated soils where compaction of the soil sample is a problem.

Remove cutting tips easily from JMC Environmentalist's Sub-Soil Probe (and Sub-Soil Probe Plus) Sampling tubes! Use one wrench to lock tightly around your sampling tube and another to clamp onto your cutting tip. With two comfortable handgrips, you can unscrew even the most stubborn connection.

Replacement part. Sandwiched between lower end of sampling tube and cutting tip. Directs flow of soil into the liner. Without it, clay samples have a tendency to crumple the plastic liners.

The heavy (12 pounds) metal sleeve that moves up and down while pounding the sampling tube into the ground. Fits both the JMC Environmentalist's Sub-Soil Probe and the JMC Environmentalist's Sub-Soil Probe PLUS.

Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

• Reduces operator fatigue.
• Punches through frozen and compacted soils.
• Drills through concrete with optional carbide bit.
• Slips easily onto JMC ESP sampling tubes or extensions (requires proprietary adapter).
• Runs on standard AC current or 1800 watt electric generator.

• Reduces operator fatigue.
• Punches through frozen and compacted soils.
• Drills through concrete with optional carbide bit.
• Slips easily onto JMC ESP sampling tubes or extensions with proprietary adapter.
• Runs on standard AC current or 1800 watt electric generator.

If you need to gather samples beneath a concrete pad, this carbide bit drills a hole large enough to allow a ESP Sampling Tube to pass through.

• Reduces operator fatigue.
• Punches through frozen and compacted soils.
• Slips easily onto sampling tubes or extensions with proprietary adapter.
• Runs on standard AC current or 1600 watt electric generator.

Already have a Bosch 11316 Percussion Hammer, 11245 Rotary Hammer, or Bosch RH1255VC Rotary Hammer? Then all you need is this adapter for your JMC Environmentalist's Sub-Soil Probe.

Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.

This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

This reusable spacer allows you to fit a 12 inch liner into an 18 inch Zero Contamination Tube. It would also fill the empty space in a 36 inch ESP Sampling containing one 12 inch and one 18 inch liner.

Remember the spacer sits on TOP of the PETG Copolyester or Stainless Steel liners inside your sampling tube.

Pivot bolt and locknut for ESP or ESP+ pedal depressor.

Pedal Depressor block.

Fulcrum for foot pedal.

Bolt & Nut, ESP & ESP Plus Footpedal Release

• Very compact! Disassembled system measures 13 x 3 x 2 inches.
• Self-sharpening, hardened cutting tip lasts 8 times longer than common replaceable tips.
• Sampling tube works best in dry soils.
• Sample Diameter is 0.56 inches.
• Handle fits other JMC sampling tubes.

Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.

Replacement liners for JMC 2x6 Concentric Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

Adapter allows the JMC Environmentalist's Sub-Soil Probe to use any JMC Sampling Tube.

In some situations, it may be expedient to plant several 2 inch diameter casings in the ground before returning to sample through each one. That is why we sell separate casings for the JMC 2 by 6 inch Concentric Sampling Tube.

Remember: This is the casing only. You should already have a Concentric Sampling Tube.

The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

• Accepts liners up to 36 inches long.
• Includes Standard Cutting Tip.

• Accepts liners up to 48 inches long.
• Includes Standard Cutting Tip.

This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Plus Regular Extensions in addition to this extension.

This extension lets you sample three feet deeper provided you have a ESP Plus Sampling Tube and a JMC ESP Plus Master Extension. Regular extensions connect to each other for additional sampling depth capability.

Replacement liner for JMC Environmentalist's Sub-Soil Probe Plus' 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

Replacement pin for both Master and Regular ESP Plus Extensions.

Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS (1.2 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.

• Reduces operator fatigue.
• Punches through frozen and compacted soils.
• Drills through concrete with optional carbide bit.
• Slips easily onto JMC ESP PLUS sampling tubes or extensions with proprietary adapter.
• Runs on standard AC current or 1800 watt electric generator.

If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.

Replacement cutting tip for most soil types.

Replacement cutting tip for saturated soils where compaction of the soil sample is a problem.

Already have a Bosch 11316 Percussion Hammer or a Bosch 11245 Rotary Hammer or a Bosch RH1255VC Rotary Hammer? Then all you need is this adapter for your JMC Environmentalist's Sub-Soil Probe PLUS.

Use our solid tip instead of a cutting tip to plunge to desired depth without filling the sampling tube. Useful for creating small diameter monitoring wells or limiting sample debris.

Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe PLUS. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.

• Reduces operator fatigue.
• Punches through frozen and compacted soils.
• Slips easily onto ESP PLUS sampling tubes or extensions with proprietary adapter.
• Runs on standard AC current or 1600 watt electric generator.

Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN453). This is the part that rests on the top of the sampling tube.

Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler).

• Precision machined aluminum
• Milled flats for tightening with a wrench

Adapter allows the JMC Environmentalist's Sub-Soil Probe PLUS to use any JMC Sampling Tube.

This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Plus Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

This reusable spacer allows you to fit one 18 inch liner into a 36 inch ESP Plus Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

This reusable spacer allows you to fit one 12 inch liner into a 36 inch ESP Plus Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

This reusable spacer allows you to fit one 12 inch liner into a 48 inch ESP Plus Sampling tube.

Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.